This is the 1/10 Electric Powered, Radio Controlled, 2WD
RJ Speed 24" Wheelbase Dragster Kit.
FEATURES: Chassis: Two piece composite fiberglass with vertical stiffener
Drive: Rear wheel drive
Brass bushings support the rear axle and front wheels
Suspension: Adjustable pull rod rear suspension
Gearbox: Open with rear pinion and spur gear
Differentials: No differential model has a solid rear axle
Tires: 1/10 scale foam pan car style on black rims on the rear and
rubber o-ring style tires on black rims on the front
Wheels: Black plastic, multi-spoke on front and rear
Suspension: Adjustable pull rod type
Camber Tie Rods: Fixed
Steering Tie Rods: Adjustable
Servo Saver: Required for steering servo (NOT INCLUDED) - KIMC1014
INCLUDES: One 24" Wheelbase Dragster Kit, mounted rear foam tires, front o-ring
tires and wheels, 81 tooth spur gear (48P), 20 tooth pinion (48p),
brass bushings, clear polycarbonate dragster body with window mask
and wing and building instructions.
REQUIRES: Radio: 2-Channel with 1 Servo (two servos required if you are going
to be using a micro switch instead of a speed control. We do not
stock a micro switch (25amp) that would work)
Radio Batteries: (8) AA size
Speed Control: electronic of modeler's choice
Motor: 550 size motor of modeler's choice
Battery: 6-cell stick or side-by-side with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Paint: Polycarbonate paint of modeler's choice
Misc. Items: Building and track equipment
Length: 24" (609mm)
Width: Not available
Height: Not available
Weight: Not available
Wheelbase: 24" (609mm)
Gear Ratio: 4.05:1
Tires- Front: 1.5" diameter O-Ring style
Rear: 1/10 scale on-road foam style (4 bolt hub style)
Length: 24" (609mm)
Width: 4.25" (108mm) tapering down to 1.5" (38mm)
Height: 4" (101mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
(4) 1/8x5/16" flanged front wheels DTXC1403 2
(2) 1/4x3/8" flanged rear axle DTXC1433 1
BOX DIMENSIONS: 6.38" W. X 4.25" H. X 25.63" L.
BOX WEIGHT: 1.92 LBS.
MODEL FEATURES A FIBERGLASS CHASSIS, FOAM REAR TIRES, O-RING FRONT TIRES, BLACK
RIMS, 81 TOOTH SPUR, 20 TOOTH PINION, SOLID REAR AXLE, CLEAR POLYCARBONATE
DRAGSTER BODY, DIE-CUT WINDOW MASK, AND BUILDING INSTRUCTIONS.
REQUIRES: 550 MOTOR, 2-CHANNEL RADIO WITH ONE STANDARD SERVO, SPEED CONTROL,
6-CELL BATTERY, CHARGER, PAINT AND MISCELLANEOUS BUILDING AND FIELD EQUIPMENT.