Welcome to Fischel's Hobby Center. We have a wide variety of hobby items. Such as Model kits, Die-cast vehicles, Paint by number, Puzzles, R/C vehicles, and more. Trains in Z, N, HO, On30, S, O & G scale, hobby tools, Paint by number, Thomas the train engine, kites, metal detectors, and much more. Keep us in your favorite bookmarks and check back once in a while you never know what we will listed that you might be looking for. Don't forget to stop by our ebay site. fischelshobbyctr
MicroHeli MHETX4022PRO Adj Tail Push Rod PRO: TREX 450X/XL
Adj Tail Push Rod PRO: TREX 450X/XL
Rigid 2mm carbon rod
Stylish and solid aluminum ends to provide maxinum secure and tail control performance
Adjustable pushrod length to achieve best mechanical tail rudder settings
Additional Delrin push rod guide with this set to minimize rod vibration under both low and high tail rotor RPM conditions
Adjustable coupling to allow adjustment of tail push rod length within range of 0.10mm to 10mm.
Special plastic joint ends are included to work with HS-50 servo
The CNC tail push rod ends are designed to reduce slop and play of the Z-bend design of the stock tail push rod ends. The new design ultilizes two miniature threaded rods to enable connection to a new plastic ball linkage so a new ball system is available to replace the Z-bend design. For HS-50 servo users, a special plastic joint end with brass pin in included to connect the tail push rod ends to the servo arm. The new system is stronger, more precise and reduce most of the play and slop.
Especially, the PRO version comes with an unique CNC aluminum push rod coupling to allow mechanical adjustment of the push rod length to achieve best tail rudder setting. It also comes with an extra delrin push rod guide to minimize rod vibration under both low and high tail rotor RPM conditions.
This system is designed to improve tail controls performance on the ALIGN T-REX 450X/XL helicopters
-2 x CNC tail push rod ends
-2 x miniature threaded rods preassembled
-1 x carbon rod (2x220mm)
-1 x carbon rod (2x30mm)
-Special plastic joint end with brass pin are included to work with HS-50 servo
-1 x extra delrin push rod guide
-Allen key and set screws included.
-Loctite (#242 is recommended) all screws while assembling the tail pulley case into the heli.
-Require a T-REX aluminum linkage ball and plastic ball linkage to attach the aluminum push rod end to servo arms of HS-55 and HS56-HB servos, no additional hardware needed for HS-50 servos.